航空复合材料加筋板压缩屈曲及后屈曲力学性能

航空复合材料加筋板由于具有良好的力学性能,广泛地应用于航空结构中。本工作研究了航空复合材料加筋板压缩屈曲及后屈曲力学性能,首先应用工程方法对复合材料加筋板进行压缩稳定性计算,得到加筋板的屈曲载荷和破坏载荷的预估值;其次,开展复合材料加筋板压缩稳定性实验,得到实验件的屈曲及破坏形式、实验件的载荷-应变及载荷-位移关系和实验件的屈曲载荷和破坏载荷。结果表明:采用工程方法得到的计算结果与实验结果较为吻合,屈曲载荷和破坏载荷的误差分别为6.12%和9.31%,合理应用工程方法可以为实验提供较好的指导;加筋板的破坏形式为壁板的分层、鼓包和撕裂、筋条的断裂以及筋条-壁板的脱粘;屈曲比为1.65的复合材料加筋板具有较强的后屈曲承载能力;工程中可充分应用加筋板的后屈曲承载能力提高结构的利用效率。     

烧蚀后的C-SiC隔离段内流场精细测量试验

为了获得极度粗糙内壁面对激波串流动特性的影响规律,通过基于纳米粒子示踪的平面激光散射技术和高频动态压力测量技术测量了Ma2来流下烧蚀后的C-SiC隔离段中激波串流场结构,获得了激波串初始激波形态、激波后附面层发展形态以及激波串动态特性。结果表明,烧蚀后的C-SiC隔离段中激波串结构与光滑不锈钢隔离段相似。但是极度粗糙的内壁面深刻影响了近壁区流动,附面层增厚效应非常明显。前者激波串内的附面层比后者厚约50%,前者激波分叉点比后者更接近唇口约30%。极度粗糙的内壁面也提高了附面层的分形维数,加剧了拟序结构的破碎程度。烧蚀后的C-SiC隔离段中附面层的分形维数在1.548～1.649,比光滑不锈钢隔离段高6.7%～8.9%。烧蚀后的C-SiC隔离段极度粗糙内壁面对激波串振荡频率几乎没有影响。激波串前传过程中的振荡频率约20Hz。     

C/SiC复合材料紧固件拉-拉疲劳行为研究

为了研究C/SiC复合材料紧固件的拉-拉疲劳行为,在疲劳应力比为0. 1、加载频率为10 Hz的条件下对不同应力水平的疲劳寿命进行统计。采用断口分析和金相分析方法对C/SiC复合材料螺钉疲劳破坏的细观机制进行了研究。结果表明:C/SiC复合材料螺钉拉-拉疲劳包含拉断疲劳及拉脱疲劳两种失效形式;基于双参数幂指数形式的寿命模型,两种失效形式的疲劳寿命经验公式相似;C/SiC复合材料螺钉的疲劳极限约为拉伸强度的65%～70%,若最大疲劳应力大于0. 7σmax,其材料损伤随循环次数增多而明显增大。     

Al/Ni含能多层膜在Al2O3陶瓷/不锈钢焊接中的应用

采用磁控溅射设备,生长AuSn合金做焊料层、Al/Ni含能多层膜做热量提供层,实现了不锈钢和Al_2O_3间的异质材料自蔓延高温扩散焊。利用SEM、XRD和DSC等测试手段表征AuSn合金和Al/Ni含能多层膜的微观形貌、相成分和放热量;用万能试验机测试焊接接头的力学性能。结果表明,AuSn合金的质量比基本达到80∶20,而多层膜的层状结构清晰,反应热达到1 239 J/g。焊接实验结果表明,仅使用AuSn焊料时,剪切强度仅为46 MPa,在增加Al/Ni含能多层膜后,其剪切强度可达90 MPa,强度提高了约一倍。焊接接头的界面显微形貌和相结构研究表明,剪切强度的增强主要是Al/Ni多层膜提供了额外能量使得界面处的反应剧烈,陶瓷金属化层与中间层的反应加剧,形成了新的反应生成物。     

Advances in critical technologies for hypersonic and high-enthalpy wind tunnel

Hypersonic and high-enthalpy wind tunnels and their measurement techniques are the cornerstone of the hypersonic flight era that is a dream for human beings to fly faster, higher and further. The great progress has been achieved during the recent years and their critical technologies are still in an urgent need for further development. There are at least four kinds of hypersonic and high-enthalpy wind tunnels that are widely applied over the world and can be classified according to their operation modes. These wind tunnels are named as air-directly-heated hypersonic wind tunnel, light-gas-heated shock tunnel, free-piston-driven shock tunnel and detonation-driven shock tunnel, respectively. The critical technologies for developing the wind tunnels are introduced in this paper, and their merits and weakness are discussed based on wind tunnel performance evaluation. Measurement techniques especially developed for high-enthalpy flows are a part of the hypersonic wind tunnel technology because the flow is a chemically reacting gas motion and its diagnosis needs specially designed instruments. Three kinds of the measurement techniques considered to be of primary importance are introduced here, including the heat flux sensor, the aerodynamic balance, and optical diagnosis techniques. The techniques are developed usually for conventional wind tunnels, but further improved for hypersonic and high-enthalpy tunnels. The hypersonic ground test facilities have provided us with most of valuable experimental data on high-enthalpy flows and will play a more important role in hypersonic research area in the future. Therefore, several prospects for developing hypersonic and high-enthalpy wind tunnels are presented from our point of view.     

Protecting Earth-orbiting spacecraft against micro-meteoroid/orbital debris impact damage using composite structural systems and materials: An overview

Spacecraft that are launched to operate in Earth orbit are susceptible to impacts by meteoroids and pieces of orbital debris (MMOD). The effect of a MMOD particle impact on a spacecraft depends on where the impact occurs, the size, composition, and speed of the impacting object, the function of the impacted system. In order to perform a risk analysis for a particular spacecraft under a specific mission profile, it is important to know whether or not the impacting particle (or its remnants) will exit the rear of an impacted spacecraft wall. A variety of different ballistic limit equations (BLEs) have been developed for many different types of structural wall configurations. BLEs can be used to optimize the design of spacecraft wall parameters so that the resulting configuration is able to withstand the anticipated variety of on-orbit high-speed impact scenarios. While the level of effort exerted in studying the response of metallic multi-wall systems to high speed particle impact is quite substantial, the extent of the effort to study composite material and composite structural systems under similar impact conditions has been much more limited. This paper presents an overview of the activities performed to assess the resiliency of composite structures and materials under high speed projectile impact. The activities reviewed will be those that have been aimed at increasing the level of protection afforded to spacecraft operating in the MMOD environment, and more specifically, on those activities performed to mitigate the mechanical and structural effects of an MMOD impact.     

基于小波包变换及相关系数法的复合材料层合板冲击位置识别研究

复合材料较为广泛应用于航空、航天等工程领域,但对冲击载荷十分敏感。因此,对复合材料结构承受的冲击载荷进行在线监测以及冲击位置的实时识别具有重要意义。文章以复合材料层合板为研究对象,基于两个冲击位置的距离越靠近则接收到信号幅频特性相似度越高的特点,采用FBG光纤光栅传感器,通过小波包变换的方法来提取能量特征向量,同时结合相关系数法来实现复合材料层合板的冲击位置识别。在480 mm×480 mm的复合材料层合板上开展冲击实验,8次实验皆完成了冲击位置识别,其中7个点距离误差为0 mm,实现精准识别,另一个点误差在6%以内。     

数字化组合式大力值校准系统的研制

为了满足对大力值(20 MN左右)的测量和校准,开发了一套数字化组合式大力值校准装置。其最大量程可达24 MN,系统测量准确度为0.1%,适合于大型材料试验机的校准和检定。本文详细介绍了装置的组成结构、弹性体设计、贴片和组桥方式、数字化的方法以及与计算机的通信实现。     

航空航天智能材料与智能结构研究进展

智能材料作为新兴多功能材料,能够实现结构功能化、功能多样化。智能结构是在结构中集成智能材料作为传感器和驱动器,使结构除了具有承载、传力、连接等功能外,还具有自感知、自诊断、自驱动、自修复等能力,以更好地适应外界环境的变化,可显著提升航空航天架构的性能。目前智能材料与智能结构已成为航空航天架构减重增效研究的重点。根据国内外智能材料和结构的研究进展,综述了压电材料、铁磁材料、形状记忆材料、智能复合材料等智能材料的发展;讨论了智能结构的研究及应用前景,包括自诊断智能结构、自修复智能结构和减振降噪智能结构;最后,指出了智能材料与结构当前面临的一些挑战性问题,展望了其在航空航天领域的应用前景。     

利用气动式溜车—管路系统实现散状物料的输送

气动式溜车－管路系统是近年来兴起的一种高效的中，长距，离输送装置，它克服了常规运输系统运费高，噪声大和污染环境的缺点，在工程上有着良好的应用前景。本文对该系统的原理和原理和结构进行了较为细致的分析，并介绍了一个应用实例。